- Home
- ยป
- Products & Services
- »
- Turbine Oil Cleaning System
Turbine Oil Cleaning System

Electrostatic Oil Cleaning Machine
Weight | 350 ~ 750 kg |
Moisture | Less than or equal to 50 PPM |
Type | Electrostatic |
Automatic Grade | Automatic |
Model | ELC-25 LP, ELC 50 LP, ELC - 100 LP |
Capacity | 20 LPM |
Features:
- Can remove contamination down to less than one micron, water, air & grasses and lower oxidized molecules of oil from hydraulic oils
- Can be installed permanently on any hydraulic power-pack as a by-pass oil cleaning unit
- Can be installed with a pressure reducing valve taking oil inlet from the high-pressure machine oil circuit or can be installed with a separate pump/motor to take out oil from the parent tank
- Used as a mobile machine to clean oil in a number of machines
- Fitted with pump/motor, preheater, vacuum pump etc to clean oil in the parent machine oil tank or outside it in drums or other reservoirs
Technical Feasibility:
- Machine filters cannot stop oil degradation by protecting its additives
- Machine filters cannot remove trapped air from oil. In hydraulic systems, entrained air produces sponginess and loss of precision control due to the air’s compressibility
- Machine filters cannot remove moisture. Water causes foaming in oils and reduces component life. It increases the rate of oxidation of the base oil
- Machine filters cannot remove oxidized lighter weight molecules of oil. Further oxidation (of these initial by-products of oxidation) causes formation of sludge, varnish, and lacquer
- Machine filters cannot remove sludge, varnish, and lacquer from oils. Once formed, varnish deposits on servo, proportional and other tight-clearance hydraulic valves result in sticking, which can slow or stop operation
- Machine filters cannot remove contamination less than 10 microns whereas some critical components in hydraulic systems have clearances between 0.5 microns to 4 microns
Additional Information:
- Production Capacity: 5-10 machine per month
- Delivery Time: 1 month from receive PO
- Packaging Details: wooden packing
Oil Filtration Systems
Material | Stainless steel |
Power | 2-10 kW |
Voltage | 380 V,50 Hz |
Weight | 90-180 Kg |
Flow | Up to 200 LPM |
Minimac systems are engaged in offering a comprehensive range of Turbine EHC Filtration Systems. Developed using best quality components, procured from certified vendors of the market, this range is in line with the global quality standards and norms. Designed utilizing high-end machinery and latest innovative tools, our products are considered best for purification system for turbine EHC (Phosphate esters). Reckoned for its energy efficiency, extraordinary performance, sturdiness and longer functional life, this range has generated huge demand in the market.
Turbine Oil Cleaning Systems
Voltage | 380 V |
Flow Rate | 10 L/Min |
Power(W) | 81,000 |
Weight | 500 - 1500 kg |
Material | Stainless steel |
We are engaged in offering a wide range of Turbine Oil Cleaning Systems. Developed using high-end technology, this range helps in maintaining the high-performance level of the machinery. Maintaining the viscosity of the oil, these machines efficiently remove solid and moisture contamination from oil. The cleaning systems that we offer prevent the wear & tear of machine components thus increasing the efficiency & functional life of bearings, pumps, seals, and gears.